Mazda CX3 Tuning

"Thank you for reading my CX3 tuning guide."

The small fun packed compact SUV from Mazda is a great car, and very well equipped.

The NASP petrol engines lack torque and need a bit of extra power in our opinion, but we guess that's why you're here.

The turbo models sizzle with performance and really reward the tuner with lots more power from relatively simple mods.

We look at CX3 tuning and outline the greatest mods that work. Mazda CX3's provide a fun base for your project and with the best uprated parts you can assuredly maximize your driving experience.

The CX3 is a good car tuning project to carry out. With the right mods your CX3 can be transformed into a stunning project. Don't waste money, do your homework and follow our unbiased guides to each performance upgrade to avoid disappointment.

Handling/Suspension upgrades

Handling modifications are high on most peoples lists for the CX3.

We found that most CX3 factory suspension setups need tweaking, they are a little firm.

There are good aftermarket upgrade options around that soften the ride but sharpen the handling.

Adding a few degrees of toe out -0.9 to 1.5, and slight negative camber will often improve your cornering and handling.

We would go to a maximum drop of 24mm - 40 mm on most models. You risk compromising your handling if you go lower than this.

Turning our attention to the CX3s engine we need to get a bit more power out of the top end.

Sadly with smaller engine sizes you are wasting your time spending money on modifications, so if this applies to you get yourself an engine swap then apply the following mods.

Power mods.

These are the sports modifications are usually fitted by our members, decide how far you want to push your car before you start.

Getting the best performance mods for your planned usage of the car is vital. Stage 3 motor sport parts just won't work well on the road difficult in stop start traffic.

Please watch our introduction Video tutorial to car tuning. Be sure to subscribe and support our new channel.

Modifying to Stage 1:

 Alloy wheels, Panel air filter, Lighter flywheel, Sports exhaust, Suspension upgrade (drop 30-40mm), Remap.

Modifying to Stage 2:

 Power/Sport clutch, Fast road cam, high flow fuel injector, Ported and polished head, fuel pump upgrades.

Modifying to Stage 3:

 Adding or upgrading forced induction (turbo/supercharger), Sports gearbox, Engine balancing, Internal engine upgrades (pistons/head/valves), Competition cam.

Peak power is good on competition cars but for a drivable and fun car you need a wide power band and perhaps extending the rev range.

In this article we shall give your a good starting base to the best performance parts for your car, but we'd encourage you to spend some time on the site looking into the details of each type of performance mod.Fast road cams offer one of the biggest performance gains for your money as far as a stand alone modified modifications goes on a NASP engine.

It improves the intake and exhaust flow and pushes up the power if done right. Ideally you'd add other mods and finish up with a reflashed ECU. TorqueCars would caution you not to go with a competition cam as this upsets the engines idling and general town driving characteristics.

You will need to ensure that the engine is not starved of fuel so will need to pay attention to the fuelling.

Using higher octane fuel is another option if you find you are suffering from detonation or premature ignition on your Mazda project after fitting other parts. Uprated injectors will enable you to supply sufficient fuel to the engine.

Uprate the fuel pump to cope with the extra fuel requirements of your tuned CX3s uprated injectors.

Intake and Exhaust Tuning.

Now we move on to the intake and exhaust and ensure proper flow through the engine. Air induction kits only help to boost power if your air intake is restricted! Adding an induction kit to most standard engines will see NO POWER GAIN AT ALL. If you have heavily modified your engine and it's need for air INCREASES DRAMATICALLY then an induction kit is the answer and will help remove this restriction.

Induction kits can work well on turbo engines and larger engines (if supplied with a suitable cold air feed or air box), generally though we'd just recommend for CX3 engines you should go with a performance panel air filter preferably made from cotton.

Do not go with the largest exhaust you can get this will slow up the exhaust flow rate - the best exhausts for power gains are usually between 1.5 to 2.5 inches. It is the shape and material more than the bore size.

Getting a professionally gas flowed head with larger valves can fully maximise your power gains.

A good triple plate fast road performance clutch will help to keep that power going where it should.

Never cut corners or think that your standard clutch to cope. The best mods we would do for your CX3 are Remapping or piggy back ecu, fast road cam and air intake and exhaustNASP engines do not achieve big power gains if you remap them, unless you have done extensive modifications.

With turbocharged engines this is another story. A remapped turbo will give phenomenal power gains and take full advantage of the strength of the block.

The most impressive power gains for NASP engines usually involve the addition of forced induction. It is often simpler to bolt on a supercharger than it is to install a turbo. It is difficult to map fuelling with a turbo as the boost builds exponentially with rpm.

Superchargers however will give a boost which is proportional to engine speed so is simpler. Adding forced induction will often require a lower compression ratio or water injection.

Alloy wheel upgrades.

As alloys are less heavy they improve performance and they will help to cool the brake disks. Pay attention to your choice of tyres (tires) for your car, a good directional tread pattern tire can really enhance your cars handling. Large CX3 alloy wheels can decrease performance. If you get big alloy wheels you will be changing your final drive ratio.

Because of this endeavour to keep the overall rolling diameter of the wheel the recommended OEM sizes. In all cases avoid going above 16 inches - the 17 are ok but you'll prefer the response you get with the 16's if you are totally honest.

For more information on Tuning your car please join us in our friendly forum where you can discuss CX3 options in more detail with our CX3 owners. It would also be worth reading our unbiased Mazda tuning articles to get a full grasp of the benefits and drawbacks of each modification.

Please help us improve these tips by sending us your feedback in the comments box below. We love to hear what our visitors have got up to and which mods work best for them on each model of car. Comments are used to improve the accuracy of these articles which are continually updated.

This article was written by Waynne Smith on TorqueCars, and I appreciate your feedback and suggestions. This entry was filed under Mazda. You can leave a response below or join TorqueCars forum to discuss this article and car modification in detail with our members.

If you liked this page please share it with your friends, drop a link to it in your favourite forum or use the bookmarking options to save it to your social media profile.

Check out TorqueCars new YouTube channel, and see their awesome new content...