Guide to tuning the Prince engine from PSA

"PSA Prince Tuning tips and guide"

We review and look at Prince tuning and outline the best mods that work.

PSA Princes make a good tuning project and with carefully picked motorsport enhancements you can definitely maximize your driving enjoyment.

We rely on our visitors to pass on tips and tell us about their projects and what worked on their car, and this article is the culmination of the feedback we have received. First let us look at the history and specs of this engine and then consider which tuning modifications work best on it.

History of the Prince Engine

A joint venture with Peugeot, Citroen, Renault and BMW with BMW labelling the engine N13 N14 and N18.

Using the Vanos tech from BMW the Prince replaced the TU engine family offering more power and better economy.

The Prince engine won 8 consecutive titles for engine of the year in the 1.4 to 1.8 liter capacity.

• 1.4 litre EP3/EP3C 89 to 94 bhp 100 to 103 lb⋅ft
• 1.6 litre EP6/EP6C naturally aspirated  118 bhp 118 lb⋅ft) at 4250 rpm
• 1.6 litre turbocharged  148 to 270 bhp (see below)
  • EP6DT THP 150 (177 lb⋅ft) at 1400 rpm
  • EP6DTS THP 175  (182 lb⋅ft +19 overboost) at 1600 rpm
  • EP6CDTS (182 lb⋅ft +19 overboost) at 1600 rpm
  • EP6CDTX 200bhp (203 lb⋅ft) @ 1700 rpm.
  • EP6CDTM THP 163 (177 lb⋅ft) at 1400 rpm
  • EP6CDT MD
  • EP6FDT - 178 bhp (133 kW; 180 PS) Euro 6
  • EP6FDTX - 205 bhp (153 kW; 208 PS)/208 bhp (155 kW; 211 PS)/210 bhp Euro 6
  • EP6FDT - 222 bhp (166 kW; 225 PS) Euro 6
  • EP6FDTR - 250 bhp (186 kW; 253 PS)/270 bhp Euro 6
  • EP6CDTR - 270 bhp (201 kW; 274 PS) Euro 6

What are the most effective Prince parts

The best tuning mods on an engine are in our opinion the ones that give the best value for money.

We won't be swayed by popular Prince tuning mods, they need to be cost effective.

The camshaft profile plays a big part in the engines power output so camshaft upgrades make quite a large difference. The intake & exhaust durations will alter depending on the chosen camshaft profile, so large bhp gains are on offer for camshaft upgrades.

Fast road camshafts usually bump the torque throughout the rpm range, you may lose a little low down bhp but the high end rpm power will be higher.

Race camshafts, bump the high end rpm power band but as a result the car will not idle smoothly and low end power nearly always suffers.

For a typical daily driver should ideally to optimize your power band to your driving style.

I'd be amazed if you find a Motorsport camshaft is a pleasure to live with when driving around busy urban areas.

Each engine responds better to less aggressive cam durations so view each engine as unique.

The ECU mapping and fuelling also have an effect on the torque gains you'll hit.

Longer valve durations can alter the torque band and on most engines the exhaust and intake durations do not need to match, although most cams and tuners use matched pairs there are some advantages to extending the intake or exhaust durations.

Please watch our introduction Video tutorial to car tuning. Be sure to subscribe and support our new channel.

Modifying to Stage 1:

 Remaps, Fast road camshaft, Sports exhaust manifold, Intake headers, Panel air filters, .

Modifying to Stage 2:

 Sports catalyst & performance exhaust, high flow fuel injectors, fuel pump upgrades, Fast road cam, Ported and polished head, .

Modifying to Stage 3:

 Twin charging conversions, Adding or Upgrading forced induction (turbo/supercharger), Engine balancing & blueprinting, Internal engine upgrades (pistons/head/valves), Competition cam, .

Mapping will help fully realize the full potential of all the tuning mods you've done to your Prince.

It will usually give around 30% more power on turbocharged vehicles and 15% on NASP engines, but you mileage will vary depending on the tuning mods you've done and the condition of your engine.

Pushing air into the Prince engine is the whole point to any engine upgrade job.

Intake manifold carry the air from the air cleaner and allow it to be drawn into the engine and mixed with fuel.

The size of bore and shape and flow characteristics of the Intake manifold can make a substantial difference to to fuel engine efficiency on the Prince.

Commonly we find the intake are in desperate need of motorsport parts, although a few OEM provide decently flowing intake.

Fitting big valve kits, doing some port matching and head flowing will also improve power, this will afford you raising the power increase on other mods.

Prince turbo upgrades - which are best?

The more air to get into an engine, the more fuel it can burn and uprating the induction with a turbocharger upgrade makes massive power gains.

NASP engines need quite a lot of work when you add a turbo, so we have a separate guide to help you take into account the pros and cons of going this route on your Prince

If your car is turbo charged tuning mods are more reliable and you'll see that turbocharged engines are made with harder and stronger components.

Can you add a turbo to the non turbo Prince engines? No the compression ratio and mapping are dramatically different. After you've altered the pistons, crank head and got the mapping sorted it would have been easier to just swap in the turbo engine and tuned that up.

However every engine will have power limits so research these limits and install better quality crank and pistons to cope with the power.

It's not unheard of drivers spending a a stack of money on turbo upgrades on the Prince only to suffer the humiliation of seeing the whole thing throw a rod just after it's been completed.

Big turbo units commonly suffer low end lag, and smaller turbo units spool up more quickly but won't have the peak rpm bhp gains.

In the last 10 years the market of turbochargers is always increasing and we commonly find variable vane turbochargers, permitting the vane profile is altered according to speed to lower lag and increase top end torque.

Twin scroll turbochargers divert the exhaust gases into two channels and feed these at differently designed vanes in the turbo charger. They also help the scavenging effect of the engine.

You'll commonly see there is a limitation in the air flow sensor AFM/MAP on these engines when considerably more air is being drawn into the engine.

We note 4 bar air sensors coping with quite large power gains, whereas the OEM air sensor was restricting power at a much lower level.

Adding a supercharger or additional turbo will make large performance gains, although more challenging to install. We have a twincharger performance adding guide if you want to read more.

Fuelling

Don't omit to increase the fuelling when you are increasing the bhp - it makes the car more thirsty. It makes sense to over specify your injectors flow rate.

The accepted safe increase is to add 20% when buying an injector, this allows for injector deterioration and gives a little spare capacity should the engine need more fuel.

Prince Exhaust

You should look to improve your exhaust if the existing exhaust is creating a flow problem.

On most factory exhausts you'll find your flow rate quite well even on modest power gains, but when you start pushing up the power levels you will need to get a better flowing exhaust.

Sports exhausts generally help improve air flow through the engine but avoid an exhaust that is too big or you could will reduce the flow rate. Stick to 1.5 to 2.5 inches as a rule of thumb.

Usual exhaust restrictions are traced to the catalyst installed, so adding a better flowing race alternative will help avoid this restriction.

Weakspots and problem areas on the Prince

The Prince engines are generally reliable and solid as long as they are regularly serviced and maintained.

Regular oil changes are vital on the Prince, especially when tuned and will help extend the life and reliability of the engine.

There have been factory recalls for failing HPFP (high pressure fuel pumps) in the Prince engines.

Carbon build up has been noted, and we recommend a good regular thrash with some BG fuel cleaner to keep on top of things.

For more information on Tuning your PSA engine please join us in our friendly forum where you can discuss Prince tuning options in more detail with our Prince owners. It would also be worth reading our unbiased PSA tuning articles to get a full grasp of the benefits and drawbacks of each modification.

Please help us improve these tips by sending us your feedback in the comments box below.

We love to hear what our visitors have got up to and which parts work best for them on each model of car. Comments are used to improve the accuracy of these articles which are continually updated.

This article was written by Waynne Smith on TorqueCars, and I appreciate your feedback and suggestions. This entry was filed under Peugeot. You can leave a response below or join TorqueCars forum to discuss this article and car modification in detail with our members.

If you liked this page please share it with your friends, drop a link to it in your favourite forum or use the bookmarking options to save it to your social media profile.

Check out TorqueCars new YouTube channel, and see their awesome new content...