Tuning the Subaru EJ16

"Building the best modified Subaru EJ16 engine!"

Carref prides itself on providing the latest tips and guides to your modification project.

TorqueCars will examine EJ16 tuning and summarise the ultimate modifications. Subaru EJ16 are fantastic to work on and with the best uprated upgrades like a remap, turbo kits and camshafts you will greatly maximize your driving enjoyment.

We rely on our visitors to pass on tips and tell us about their projects and what worked on their car, and this article is the culmination of the feedback we have received. First let us look at the history and specs of this engine and then consider which tuning modifications work best on it.

History of the Engine

  • Impreza 93-94 (JDM only) GC4 series
  • Impreza 93-06 (Europe & Middle East)
  • Impreza 93-97 (Australia)
  • Impreza 93-06 (Latin America)
  •  89–97 bhp @6000 rpm  102 lbft at 4500 rpm

Tuning the Subaru EJ16 and best EJ16 performance parts.

What are the most effective EJ16 upgrades

Just because particular upgrades are are common on EJ16 it doesn't mean its worth having, we shall greatest upgrades that will give your EJ16 the best power gain for you money.

The camshaft profile plays a big part in the engines power output so camshaft upgrades make quite a large difference. The intake & exhaust durations will alter depending on the chosen camshaft profile, so large engines power gains are on offer for camshaft upgrades.

Fast road camshafts normally increase the performance through the rpm band, you may lose a little low down torque but your higher rpm power will be higher.

Race camshafts, increase the higher rpm power band but as a result the car will not idle smoothly and low end power nearly always suffers.

A Motorsport and race cam won't do well if driving around busy urban areas.

You should ideally optimize your torque band to your typical driving style so for a car driven daily stick with a fast road EJ16 cam

Different EJ16 engines respond better to more or less aggressive cam durations so view each engine as unique.

The map and fuel pump and injectors also will make differences on the power gains you'll get.

Longer valve durations can alter the power band and on most engines the exhaust and intake durations do not need to match, although most cams and tuners use matched pairs there are some advantages to extending the intake or exhaust durations.

Please watch our introduction Video tutorial to car tuning. Be sure to subscribe and support our new channel.

How to tune your car

  1. Improve the handling

    Focus on Suspension improvements, such as coilovers and make sure the bushings are in good order and that the alignment is correct. Then focus on improving the brakes, with a big disk brake conversion kit and fast road brake pads.

  2. Remove restrictions

    Focus on the intake and exhaust with filters being the common point of restriction in a tuned car. Intercoolers may also become restrictive on turbo engines so this may also need to be uprated.

  3. Burn more fuel & air

    Increase the fuelling so it matches the air coming into the engine. The ratio is important so you need to improve the fuel pump and injectors, so the head mods, big valve conversions, fast road camshafts and forced induction upgrades extra supply of air is adequately met.

  4. Test and replace any weak parts

    Weak areas are commonly the clutch, the turbocharger and pistons and crankshaft in a highly tuned engine. Makes sure these components will cope with your power aspirations.

  5. The Tune or Remap

    A cars ECU controls the fuel, timing, spark and even the turbo in some cases, so to fully extract your gains you should remap the car last and this will fully release the power. Some cars are easy to map, and others require piggyback ECU's or aftermarket ECU's but this is the most vital step of your tuning project.

Modifying to Stage 1:

 Intake headers, Remaps/piggy back ECU, Panel air filters, Sports exhaust manifold, Fast road camshaft, Drilled & smoothed airbox.

Modifying to Stage 2:

 high flow fuel injectors, fuel pump upgrades, induction kit, Sports catalyst & performance exhaust, Fast road cam, Ported and polished head.

Modifying to Stage 3:

 Adding or Upgrading forced induction (turbo/supercharger), Competition cam, Internal engine upgrades (head flowing porting/bigger valves), Engine balancing & blueprinting, Crank and Piston upgrades to alter compression, Twin charging conversions.

The EJ16 units are fantastic to work on and we see that there are quite a few choices of modifications and performance parts around.

ECU flashing should help to to establish the full potential of all the parts you've done to your EJ16.

It will usually give around 30% more power on turbocharged vehicles and you can expect to see around 15% on NASP engines, but your mileage often differs on the parts you've carried out and the condition of your engine.

Forcing air into each cylinder is vital to any performance tuning job.

Headers flow the air during the suck phase from the filter and allow it to be drawn into the engine cylinders with fuel for the squish phase.

The size of bore and shape and flow characteristics of the Intake manifold can make a noticeable effect on to fuel delivery on the EJ16.

Many mass produced engine air intake manifolds are ripe for aftermarket tuning parts, although a few makers provide decently flowing air intake manifolds.

Larger EJ16 valves, carrying out 3 or 5 angle valve jobs and porting and head flowing will also raise bhp, and significantly will allow you to get raising the bhp increase on other parts.

Which turbo upgrades are best?

NASP engines need quite a lot of work when you add a turbo, so we have a separate guide to help you take into account the pros and cons of going this route on your EJ16 but we don't think it is worth the effort or cost.

The more air you can get into an engine, the more fuel it can burn and uprating the induction with a turbocharger upgrade makes impressive power gains.

Research these limits and install better quality components to utilize the power.

We see many tuners spending a lots of money on turbo upgrades on the EJ16 only to watch the engine block go up in smoke just after it's first rolling road session.

It is not unusual that there is a restriction in the air flow sensor AFM/MAF on the EJ16 when considerably more air is being drawn into the engine.

We note 4 bar air sensors coping with quite large power gains, whereas the OEM air sensor sapped bhp and torque at a much lower level.

Adding a supercharger or additional turbo will make large power gains, although harder to get working. We have this feature on twinchargers if you want to read more.

Fuelling

When you increase the power you will need to uprate to the fuel system.

More power needs more fuel. We would recommend you to be generous with your flow rate on the injectors.

The accepted safe increase is to add another 20% when fitting an injector, this accounts for injector deterioration and affords a little spare capacity should the engine require more fuel.

We think this one is common sense, but you'll need to match your fuel injector to the type of fuel your car uses as well.

All the following flywheel power targets will assume an injector duty cycle of 80% and a base of 58psi of fuel pressure at idle.

4 Cylinder turbocharged engines

  • 58 PSI 340cc/min 200hp
  • 58 PSI 511cc/min 300hp

4 Cylinder NASP engines

  • 58 PSI 285cc/min 200hp
  • 58 PSI 426cc/min 300hp

Choosing the right performance exhaust

One of the most common mistakes and problems we see in tuning projects is usually down to the exhaust, or rather a poorly chosen exhaust for your engine.

You should look to uprate your exhaust if the current exhaust is actually causing a restriction.

On most factory exhausts you'll find the flow rate is still ok even on modest power gains, but when you start pushing up the power levels you will need to get a better flowing exhaust.

Sports exhausts generally help improve air flow out of the engine but do not go too large or you could will reduce the flow rate. Stick to 1.5 to 2.5 inches as a rule of thumb.

Typically exhaust restrictions can be located the catalyst and filters installed, so adding a better flowing race alternative will help avoid this restriction.

Weak spots Issues & problem areas on the EJ16

The EJ16 engines are generally reliable and solid as long as they are regularly serviced and maintained.

Regular oil changes are vital on the EJ16, especially when tuned and will help extend the life and reliability of the engine.

For more information on Tuning your EJ16 engine please join us in our friendly forum where you can discuss tuning options in more detail with our worldwide members with the EJ16 engine, or read our ej16 tuning articles  to get a full grasp of the benefits and drawbacks of each modification.

Please help us improve these tips by sending us your feedback in the comments box below.

We love to hear what our visitors have got up to and which tuning mods work best for them on each model of car. Comments are used to improve the accuracy of these EJ16 articles which are continually updated.

If you liked this page please share it with your friends, drop a link to it in your favourite forum or use the bookmarking options to save it to your social media profile.

Check out TorqueCars new YouTube channel, and see their awesome new content...

Feedback

Please use our forums if you wish to ask a tuning question, and please note we do not sell parts or services, we are just an online magazine.

Help us improve, leave a suggestion or tip

Your Constructive comments on this article





TorqueCars Forums

Join TorqueCars our sister site to read over 300,000 posts on modified and tuned cars and tips.

This will also allow full access to their car project features, gallery and some and exclusive member only areas.




Forum Hot topics

  • How do I wire up neon lights. I want to add ...
    Sign up now


  • What is the biggest NOS jet I can add ...
    Sign up now


  • What is the best launch method on a drag race ...
    Sign up now
  • Having trouble with loss of power at 3000 RPM - 4000 RPM ...
    Sign up now
  • Staffordshire boy saying hullo to yall...
    Sign up now
  • How much can I lower my Nissan ...
    Sign up now


Performance Clutches

Clutch tuning: performance clutch modifications and triple plate clutches setup
Read more...

Flywheel Lightening

Flywheel lightening & performance gains from lighter flywheels
Read more...

Split Bonnets

Creating a custom self opening split bonnet or split hood.
Read more...

Engine Dress Up

Engine styling dress up kits hoses, dress up parts and engine covers
Read more...

Dent Removal

Removing dents
Read more...

Cylinder Head Tuning

Cylinder Head Tuning in the UK
Read more...

MPG Calculator 2

MPG calculator UK miles per Gallon – calculate MPG
Read more...