Volvo 740 Tuning

"The 740 is one of the best Volvos from a tuning point of view."

The 740 was introduced in 1984 and ran right up to 1993 and has been a good solid mid size car in the Volvo range. Because of it's smaller body (than the 940 at least) it offers great potential as a performance car. The engines of choice are the meaty 2.0 and 2.3 Turbo petrol engines with both offering a lot of power.

Post 1990 models had the better TD04 turbo from Mitsubishi which addressed low end lag at the expense of top end power. A hybrid turbo can really improve both pre and post 1990 engines. Later models also saw a revised fuel delivery system offering both more power and extra efficiency.

Before we start discussing tuning we really need to address the handling of these cars. Look to uprate the handling of your 740 with slightly stiffer suspension and a modest drop. This will improve cornering. If the suspension is old then replace worn bushings with polyeurothane ones. We would suggest a maximum drop of 35mm on the sportier models and a bit more at 40mm for most other models. You risk rubbing on the arches if you go lower than this and you'd also need to realign the entire suspension geometry.

Top end power should be your overall aim on the 740 with a nice fat peak torque band through the rev range. Focus attention on the engines breathing first and then look to internal improvements for a larger power gain. 

The best power gains come from larger engine sizes and the turbo engines in particular. The non turbo 2.0 is ok but will not set the world alight and for the amount you'd need to spend on it then a swap to the turbo makes economic sense. Although there are still plenty of things that can eb done to the NASP 2.0 to improve power you have to be realistic as this will be very expensive for anything more than a modest gain. In car tuning the more you start with the bigger the return on your investment so engine swaps are good value mods for small engined cars.

Volvo 740 Tuning modifications.

Doing this will help to keep the cars economy at lower speeds. A fast road cam will be one of the best power mod you can do mechanically to your engine. Don't forget to uprate the fuelling when you are increasing the power - it makes the car more thirsty. An aftermarket fuel pressure regulator will almost certainly give a snappier throttle response than the standard Volvo one but will not necessarily increase the power! Uprated injectors will enable you to supply sufficient fuel to the engine. Uprate the fuel pump to cope with the extra fuel requirements of your tuned 740.

Volvo 740 Intake and Exhaust.

Breathing mods are usually next up. For NASP engines go with a washable panel air filter constructed from a cotton gauze. On the nice turbo lumps an induction kit will help increase peak power and give you a much more sporty sound. (read our article on induction kits for some essential pointers in this often misunderstood area.) A good sports exhaust is essential to balance an induction kit, just adding an induction kit on it's own will do little to increase your power.

In nearly all cases of 740 tuning your clutch will start to slip if the existing clutch has seen high miles or your power gain is greater than 40% of standard, and this will obviously need to be uprated - read our article on clutches for more information. NASP engines do not achieve big power gains if you remap them but with turbo engines this is another story. A remapped turbo remapped turbo will give phenomenal power gain but add in a better release valve and wastegate and hybrid turbo and you will see enormous gains. Despite the large cost involved adding forced induction to a NASP engine will give large power gains but you'll be looking at changing most of the internal components.

If you  are NASP powered and feel the need for forced induction then it will be easier to bolt on a supercharger than it is to get a turbo working. One of our members has a supercharged Volvo that turns in good track times. On a turbo kit the boost curve is related exponentially to the engine speed making it hard to map but superchargers linear power gains make mapping a lot easier. Alternatively you could add water injection and use high octane fuel to control knock.

Volvo 740 Wheel modifications.

The benefits of alloy wheels include a lower unsprung weight and more efficient brake cooling. The downside to large alloy wheels on your 740 is that you alter your effective final drive ratio and this will have a detrimental effect on performance. Aim to keep the overall rolling diameter of the wheel the same as supplied from the factory. In all cases we do not recommend going above 16 inches.

Please join us in our forum to discuss the 740 options in more detail with our 740 owners. It would also be worth reading our Volvo tuning articles to get a full grasp of the pros and cons of each type of modification.

This article was written by Waynne Smith on TorqueCars, and I appreciate your feedback and suggestions. This entry was filed under Volvo. You can leave a response below or join TorqueCars forum to discuss this article and car modification in detail with our members.

If you liked this page please share it with your friends, drop a link to it in your favourite forum or use the bookmarking options to save it to your social media profile.

Check out TorqueCars new YouTube channel, and see their awesome new content...